Table of Contents
Advertisement
Press [STOP] to stop time shift and return to Live mode.
9.
Auto Time Shift Function
1.
Press the [MENU] button to enter the main
menu, select [DVR]
Select [ENABLE] to activate the auto time
2.
shift function.
3.
Auto Time Shift function mode will begin 30
seconds after channel change automatically
Press [PAUSE] to activate time shift
4.
function.
Standby Modes
Press the [POWER] button, the unit will enter passive standby mode. The unit
1.
will enter full standby mode after 10 seconds.
While recording if [POWER] button is pressed, a dialog box will be displayed-
2.
Select [Yes]: Recording will be stopped and unit will enter passive standby
mode, unit will enter full standby mode after 10 seconds.
Select [No]: Unit will continue recording and enter passive standby mode.
When recording is complete, the unit will enter full standby mode.
Select [Cancel]: To cancel this operation.
3.
When a timer is set to begin while unit is in full standby mode, it will turn on
automatically and enter passive standby mode and begin recording. Once
recording is complete, the unit will re enter full standby mode.
Basic Operation
Firmware Update
Upgrade software by inserting USB device into the USB port.
Please visit the Software Updates section of the STRONG website at
http://www.strong.com.au/software.html
the SRT 6100.
Once you have downloaded the software place it on a USB stick, please ensure that
the USB stick has no other files stored on it other than the required software file.
Then click on the "How to Install" link for a complete step by step instruction sheet on
how to update your receiver to the latest software version.
Factory Default
Use this option if you encounter a problem after having changed some parameters.
This option will reset the unit's data to restore it to the factory default settings.
Press [MENU] to open MAIN MENU.
1.
Press [UP]/[DOWN] to select "Setting"
2.
DVR SETTING.
to download the latest software version for
21
Hide quick links:
Advertisement
Table of Contents
