Directed Electronics Python 1401 Installation Manual page 50

Remote start keyless entry
Hide thumbs Also See for Python 1401:
Table of Contents

Advertisement

2-8 Aux 1 Validity (1)
(4)
Validity: Output that will send a signal as long as the transmission is re-
ceived.
Latched: Output that will send a signal when the Aux 1 button is pressed
and will continue until the same button) is pressed again.
Latched, reset with ignition: Similar to the latched output this output type
turns ON the first time the Aux 1 button is pressed and turns OFF the next
the same button is pressed. This output type additionally stops and resets
whenever the ignition is turned ON, and then OFF.
30-second timed: Output that will send a continuous signal for 30 sec-
onds.
Off: Output is disabled.
Note:
All auxiliary channel timed outputs can be programmed using the Bit-
writer® (1-90 seconds)
2-9 Aux 1 Linking, None (1)
(5). When programming to Validity or timed output this can be programmed to
activate when locking or unlocking (or remote start) with the transmitter.
Note: Aux linking gives you option to have the auxiliary wire activate when
locking, unlocking, locking and unlocking or with remote start.
2-10 Aux 2 Validity (1)
(4) Output, (5) Off: Auxl 2 can be programmed for these output configurations.
The unit is set to the default validity output. To change the configuration use the
two-honk setting to toggle through the different configurations. Refer to feature
2-8 for additional details
.
2-11 Aux 2 Linking None (1)
(5). Refer to feature 2-9 for additional details.
2-12 Aux 3 Validity (1)
(4) Output, (5) Off: Aux 3 can be programmed for these output configurations.
The unit is set to the default validity output. To change the configuration use the
two-honk setting to toggle through the different configurations. Refer to feature
2-8 for additional details.
50
Latched (2), Latch reset w/ignition (3), 30-sec. timed
Lock (2) Unlock (3) Lock/Unlock (4) Remote Start
Latched (2), Latch reset w/ignition (3), 30-sec. timed,
Arm (2) Disarm (3) Arm/Disarm (4) Remote Start
Latched (2), Latch reset w/ignition (3), 30 -sec. timed,
© 2008 Directed Electronics. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents