Additional System Features; System Features Learn Routine - Directed Electronics Python 1401 Installation Manual

Additional system features

For information about Valet mode, Remote starting the vehicle, Manual transmis-
sion vehicles and Timer mode, please consult the Owner's Guide (see Using
the system and Using the remote start) on the web at www.directechs.com.

System features learn routine

The System Features Learn Routine dictates how the unit operates. It is possible to
access and change any of the feature settings using the Valet/program switch.
However, this process can be simplified by using the Bitwriter®. Any of the
settings can be changed and then assigned to one of four remote controls. This
feature is called Owner Recognition. Each time that particular remote control is
used to disarm the system, the assigned feature settings will be recalled. Owner
Recognition is only possible when programming the unit via the Bitwriter®.
If programming with the Bitwriter®, the learn routine can be locked or
unlocked. If the learn routine has previously been locked, it must be
unlocked with Bitwriter® - this cannot be done manually with the Valet
switch.
40
1. Ignition. Turn the ignition on, then off. (The heavy gauge
PINK wire must be connected.)
2. Select a Menu. Press and HOLD the Valet/Program
switch. (The Valet/Program switch must be plugged
into the blue port.) After three seconds the LED flashes
and horn honks one-time, indicating entry to the Basic
Features Menu. If this is the menu you want, release the
button and go on to Step 4.
If the button is not released, the program jumps to the
next menu, the LED flashes and the horn honks twice.
There are three possible menus. Select the menu you
want, then release the Valet/Program switch.
© 2008 Directed Electronics. All rights reserved.