Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Quanmax TOUCH TOY
Summary of Contents for Quanmax TOUCH TOY
- Page 1 NETWORK MANUAL TOUCH TOY ENGLISH...
-
Page 2: Table Of Contents
Net status 2.2.5 Internet connection with WLAN 2.2.6 Internet connection with UMTS 2.2.7 Internet connection with GPRS Select menu item „Net status“ to connect a Touch Toy terminal to the network. 2.2.8 Connection test Register Terminal Network options Transfer now For the Touch Toy network, a connection to an internet provider is required (for example via modem or net- work card). -
Page 3: Touch Toy Registration 6 • Log-File(S)
Number of transmissions: 5 i.e. every day between 12:00 and 23:59 the network data of the Touch Toy terminal will be updated for 5 times. The game mode will not be interrupted during data transfer. To save settings and exit menu, press 2.2.1 Choose connection Store-button It is important to configure the internet connection first, in order to be able to implement the Touch Toy regis- tration data afterwards. To do this, select menu item „Step1 - Choose connection“ to configure the existing 6. Connection test internet connection. With the Connection test method it‘s possible to verify the networkconnection immediately 2.2.3 Internet connection with ADSL (DSL) The following options are available: •... -
Page 4: Internet Connection With Lan
1. Select the available WLAN USB adapter, which is connected to the Touch Toy computer unit („Available WLAN adapter“). Automatic network configuration via DHCP: 2. Select the according WLAN network which the Touch Toy terminal should use to access the internet If the connected network supports DHCP (Dynamic Host Configuration Protocol), all network settings are („Available WLAN networks“). -
Page 5: Internet Connection With Umts
• Password In the selection field „Number“ press Editing-Button 3. To protect the WLAN network against unauthorized users we recommend you to activate a data Type in the GPRS-provider specific password and press OK-Button encryption method.These data encryption methods are available: WPA, WPA2, WEP 64 bit or 128 bit DNS 1 • Enter the WEP key in HEX or ASCII characters In the selection field „DNS 1“ press Editing-Button •... - Page 6 nection, it can take up to one minute). The actual status of the existing internet connection is displayed in the field „Connection status“: • not connected - No connection to the internet established • connecting - Trying to establish a connection to the internet • connected - Sucessfully connected to the internet If a successful connection to the internet is established, it is possible to start the PING-test to test the connection. The PING-test sends data packets to a certain IP address and receives packets again from this selected IP address. Consequently you can notice if data packets can get send and received from the internet. • root dns - connection test to Main-DNS-server • google - connection test to website www.google.com • funworld - connection test to website funworld.operationnetwork.org Example: Select Button [google] - connecting website www.google.com (IP Address 216.239.59.147) and try to ex- 2.2.7 Internet connection with GPRS...
-
Page 7: Connection Test
No network / reset User name: password: DE365MAYR109XYZ FUN5621 All network settings and registration data are deleted. However the Touch Toy terminal can get registered The Touch Toy is connecting to the server and the validity of the entered User name and password will get again any time. verified. Then another menu will get displayed, enter the location data and press Store-Button Connection test Is a firewall installed in the local network, there is the possibility that some ports are blocked, and several Touch Toy online applications will not work. In such case please use the connection test method to verify... -
Page 8: Modem
Modem Supported Modems Modem Types analogue modem Type: Dynamode (Neolec) Freeway 56 USB TT designation: SmartUSB56 Voice Modem ISDN modem Type: Webjet Pocket USB TT designation: (ISDN) remote network access GPRS modem Type: Wavecom 1206 Fastrack GPRS TT designation: wavecom GPRS Type: Nokia 30 GPRS TT designation: Nokia 30 UMTS modem... -
Page 9: Modem Describtions
Modem Description 7.3.3 Wavecom 1206 Fastrack GPRS Dual band EGSM900/1800 MHz 7.3.1 Dynamode M56 USB accessories: • serial-/ USB-adapter • antenna lead, incl. antenna Since all modems connected to the new power box Xtreme communicate via USB interface, a serial-/USB- adapter for the modem Wavecom 1206 GPRS Fastrack is needed. 7.3.2 Webjet Pocket ISDN USB (ISDN remote network access) The case of Webjet Pocket has two signal lights which provide constant information about the status of the adapter and the ISDN line. * The status of the modem was taken after the Touch Toy software was complete started-up. -
Page 10: Nokia 30 Gprs
7.3.4 Nokia 30 GPRS EGSM 900/GSM 1800 network The modem Nokia 30 consits of two parts: • modem • RS 232 adapter for the modem The Nokia 30 has an internal antenna but if the signal strength is insufficient for otpimal use, an external antenna can be attached to the modem. accessories: • serial- / USB adapter • antenna lead incl. antenna 7.3.5 E220 HSDPA USB Modem Since all modems connected to the new power box PRO comunicate via USB interface, a serial- / USB adapter for the modem Wavecom 1206 GPRS Fastrack is needed. Insert the SIM card Nokia 30 light indicators:... -
Page 11: Glossar
Glossar „Dynamic Host Configuration Protocol“ A protocol that provides a mean to allocate IP address dynamically to computers on a LAN. It eliminates the need to manually assign permanent IP addresses. DSL: TCP/IP: „Digital Subscriber Line“ „Transmission Control Protocol/Internet Protocol“ DSL is a telecommunication technology that provides a fast, permanent connection to the Internet by using The TCP/IP is the Standard-Internet-Protocol. - Page 12 PPTP is a network protocol, which is used for an ADSL-access (specially in Austria). Access) which is responsible for the connection of the ISDN terminal equipment. On one S0-Bus it is possible to connect 8 terminals DSL Modem: The DSL modem, serves the transmission of data over a DSL-line. B-Kanal (ISDN): ISDN consists of two 64-Kbit/sec channels (called the B channels). Therewith two connections can get Router: established at the same time. A Router is a switching-computer, which is involved in establishing a connection in a computer network, e.g. the internet. Such switching-computers route the data packages on the basis of the address to the SIM (SIM card) respective target computer. The address determines, to which other Router or personal computer the data SIM cards are telephone cards for mobile phones. SIM cards identify the subscriber of the telephone must be send to and the Router decides for each case (temporally and distance-moderately) the most favourable way. You can also use a Router to function as a switching-computer between several local...
- Page 13 HSDPA: High-Speed Downlink Packet Access (also known as High-Speed Downlink Protocol Access) is a 3G (third generation) mobile telephony communications protocol in the High-Speed Packet Access (HSPA) family, which allows networks based on Universal Mobile Telecommunications System (UMTS) to have higher data transfer speeds and capacity. Quanmax AG | Division funworld Photo Play Str. 1, A-4860 Lenzing Tel. +43 7662 6785 0, Fax +43 7662 6785 55 sales@funworld.com, www.funworld.com...
Need help?
Do you have a question about the TOUCH TOY and is the answer not in the manual?
Questions and answers