Table of Contents
Advertisement
5
Accessories
5.1
Preparation Steps
Before installing the optional modules, please make some preparations as follows.
1.
Turn off the printer
Remember to switch off the printer before installing any module.
2.
Open the printer cover and the printing mechanism
Open the printer cover by pulling the release catches on both sides of the printer and lift the cover.
Please see the Section 2.1 for further information about Open The Printer.
3.
Remove the front cover
Please pull frontward to remove the front cover.
The printing mechanism is lifted up
with the printer cover
Pull frontward
32
Hide quick links:
Advertisement
Table of Contents
