Operation Panel; Printer Setting And Control - Godex RT200 User Manual

3

Printer Setting And Control

3.1

Operation Panel

Operation Panel Introduction
POWER Button
Press the POWER button and the LED indicator lights up green. The printer is on " Ready to print " status now.
When printer is turned on, keep pressing the POWER button for 3 seconds will turn the printer off.
FEED Button
When you press the FEED button, the printer moves the label to the defined stop position.
If you are using continuous labels, pressing the FEED button will move label stock until you release the button again.
If you are using individual labels, pressing the FEED button will move only one label.
If the label does not stop at the correct position, you need to run the auto-detection function on the label stock, please see Section 3.2 Label
Calibration and Self Test.
LED Indicators
LED Indicator Status
Green Standby
Red Error
OPERATION PANEL
Description
The printer is ready for operation.
The printer has detected an error.
See Section 3-3. Error Alerts.
20
POWER LED
STATUS LED
FEED BUTTON
POWER BUTTON