Canon imageRUNNER 3300 series Function Manual page 40

3
2
4
2-14 Changing the Scanning Ratio (Copy Ratio)
Set a copy ratio by pressing "–" or "+," and press "Done."
You can use - (numeric keys) to enter the value.
Even if you enter the ratio with
values with "-" or "+."
The specified mode is set and the display returns to the Scan screen.
If you enter a value outside the setting range, a message prompting you to enter the
appropriate value appears in the screen.
NOTE
•
If you make a mistake when entering values, press
Press (Start).
The machine starts scanning. (See 'Storing Originals in the Mail Box,' on p. 1-9.)
NOTE
•
To return the ratio to 100%, press "Direct."
•
To cancel all settings at once, press "Initial Settings." (The machine returns to the standard
scanning mode.)
•
To return the display to the Mail Box Selection screen, press
- (numeric keys), you can change the entered
(Clear) and enter the correct value.
(Reset).