Adding Job Separator Sheets, Front And Back Covers To Printed Sets (Cover/Job Separator) - Canon imageRUNNER 3300 series Function Manual

4
3
Adding Job Separator Sheets, Front and Back Covers to
Printed Sets (Cover/Job Separator)
When you select multiple documents and set the Merge Documents mode, you can set the
machine to automatically add front and back covers, or job separator sheets, to divide each
document, using a different type of paper stock from what is used for the main text.
IMPORTANT
•
When the machine is operating in the Cover/Job Separator mode, you cannot use the Non-
collate, Group, Offset Group, Rotate Collating, Rotate Grouping, or Booklet modes.
•
You can set this mode only when you select multiple documents and set the Merge Documents
mode. (See 'Printing Multiple Documents as One Document (Merge Documents),' on p. 3-33.)
•
You cannot print on the front cover, back cover, or job separator sheets.
•
If the Finisher-J1 (option) is attached, stapling is not possible when the total number of prints
including insertion sheets exceeds 30 sheets (for LTR and LTRR size), 20 sheets (for LGL size)
or 15 sheets (for 11"x17" size).
•
If the Saddle Finisher-G1 (option) is attached, stapling is not possible when the total number of
prints including insertion sheets exceeds 50 sheets (for LTR and LTRR size) or 25 sheets (for
11"x17" and LGL size).
3-18 Printing a Document in a Mail Box After Changing the Settings
Press "Start Print."
The machine starts printing. (See 'Printing Documents Stored in the Mail Box,' on p. 1-13.)
If there is a current job or reserved job, the machine starts printing after that job is
completed.
NOTE
•
To cancel the setting, press "Two-sided Printing" → "Cancel," in this order.
•
To cancel all settings at once, press "Initial Settings." (The machine returns to the standard
mode of Local Printing.)
•
To return the display to the Mail Box Selection screen, press (Reset).