4
2
5
2-18
Changing the Scanning Ratio (Copy Ratio)
Press "Zoom Program."
Press "Original Size" and enter the size
enter the size to be recorded
When entering values in millimeters, you can use
The specified mode is set and the display returns to the Scan screen.
If the zoom ratio is less than 25%, a message telling you that the ratio will be adjusted to
25% appears. If it is more than 800%, a message telling you that the ratio will be adjusted
to 800% appears.
NOTE
•
Place the original on the platen glass if the zoom ratio is more than 400%.
•
If you make a mistake when entering values, press "C," and enter the correct value.
•
To designate the sizes of the horizontal direction (X) and the vertical direction (Y)
independently, press "XY Zoom."
•
If you want to enter values in millimeters, press "mm."
•
For details of how to enter values in inches, see the Reference Guide.
press "Record Size" and
→
press "OK."
→
-
(numeric keys) and
(Clear).