Installing The Device; Selecting The Mounting Location - SMA SUNNY BOY 1100 Installation Manual

SMA Solar Technology AG
4 Installing the Device
4.1 Selecting the Mounting Location
DANGER!
Danger to life due to fire or explosion!
Despite careful construction, a fire can occur with electrical devices.
• Do not mount the Sunny Boy on flammable construction materials.
• Do not mount the Sunny Boy near highly flammable materials.
• Do not mount the Sunny Boy in potentially explosive areas.
CAUTION!
Parts of the enclosure can get hot - Risk of burn injuries!
• Mount the Sunny Boy in such a way that it cannot be touched inadvertently during
operation.
CAUTION!
Risk of injury due to the heavy weight of the Sunny Boy!
• Take the weight of the Sunny Boy of approx. 25 kg into account for mounting.
Observe the following conditions during mounting:
• The installation method and mounting location must be suitable for the weight and dimensions
of the Sunny Boy (see section 11 "Technical Data" (page 42)).
• Mount on a solid surface.
• The installation location must be accessible at all times.
• Vertical installation or tilted backwards by max. 45°.
• The connection area must point downwards.
• Never install the device with a forward tilt.
• Do not install horizontally.
• Install at eye level to allow operating modes to be read.
Installation Guide

Installing the Device

SB11_12_17-IEN094131 11