Magnetic Brakes - Permobil Chairman Entra Service Manual

Magnetic brakes

Magnetic brakes
Removing
1. Raise the seat lift to its highest position (for
chairs without a seat lift, use the crank supplied)
see page 7.
2. Remove the cover, see page 7. Move the
brake release lever fully forwards to facilitate
removal.
3. Switch off the power using the control panel.
4. Put the circuit breaker to the "OFF" position,
see page 7, and remove the batteries,
see page 8.
5. Disconnect the magnetic brake electrical
connector, see fig. 15.
6. Pull the cable sleeve forwards and take the
cable out through the slot in the cable
mounting. Unhook the brake release cable
from the magnetic brake, see fig. 16.
7. Unscrew the three bolts that hold the brake.
Remove the brake, complete with the disc
and cover.
8. Note the position of the brake release arm,
see fig. 17.
Fig.15. Magnetic brake electrical connector.
Fig.16. Brake release cable.
Fig.17. Magnetic brake fixing bolts.
12