Permobil Chairman Entra Service Manual page 18

Seat lift
The upper part of the seat lift is mounted on the
seat and can be detached as described in the
following.
10. Unscrew and remove the two screws holding
the seat plate, see fig. 32.
11. If the seat is equipped with seat tilt, unfasten
the actuator's front bracket, see fig. 33. Draw
the seat tilt mechanism apart, see fig. 34.
12. Unscrew and remove the four screws holding
the seat lift, see fig. 34 and 35.
Fitting
Fitting is performed in reverse order.
Fig. 34. Seat with seat tilt, the upper part of the
seat lift is mounted with four screws.
Fig. 32. The seat plate is mounted with two screws.
Fig. 33. Unfasten the front bracket on
the seat tilt actuator.
Fig. 35. Seat without seat tilt, the upper part of
the seat lift is mounted with four screws.
18