Permobil Chairman Entra Service Manual page 14

Magnetic brakes
4. Insert a bolt to align the parts then secure the
magnetic brake using the three bolts, see fig. 21.
5. Connect the magnetic
connector, see fig. 22.
6. Fit the brake release cable, see fig. 23.
7. Fit the batteries, see page 8.
8. Put the circuit breaker to the "ON" position,
see page 8.
9. Fit the cover, see page 7.
brake electrical
14
Fig.21. Use one of the fixing bolts to align the
parts with one another.
Fig.22. Magnetic brake electrical connector.
Fig.23. Magnetic brake release cable.