Setting Up Your Handset; Install The Battery; Connect The Charger - Uniden XDECT R003 Owner's Manual

Setting Up Your Handset

Install the Battery

1. Unpack the handset, battery pack, and
battery cover. If the battery cover is
already on the handset, press in on the
notch and slide the cover down and off.
2. Line up the battery pack
connector with the jack inside the handset. (The battery connector
only fits one way.)
3. Push the battery pack connector in until it clicks into place. Tug
gently on the wires to make sure the battery pack is securely
connected.

Connect the Charger

1. Connect the AC adapter to the charger's
jack and route the cord as
DC IN 9V
shown. (This adapter might already be
connected.)
2. Plug the other end of the adapter into a
standard 240V AC power outlet.
4. Place the cover over the battery
compartment and slide it up into
place.
3