How It Works - Uniden XDECT R003 Owner's Manual

Using the Repeater/Charger

How it Works

The XDECT R003BT repeater/charger extends the range of your
base in all directions, including up and down. Each handset will
automatically connect to the repeater/charger or the base,
depending on which signal is stronger. (The handset operates
exactly the same way whether it's connected to the base or to the
repeater/charger.)
 To use the charger's repeater function, you must register the
charger to an XDECT R035BT base. (Any repeater/chargers that
came packaged with the base are already registered to that base
for you.)
 An XDECT R035BT base can support up to six XDECT R003BT
repeater/chargers, including any that were supplied with your
phone.
 Usually, you can't tell when a handset switches between the
base and the repeater/charger in the middle of a call, but
sometimes, you might notice a brief pause in your conversation.
Repeaters can be up to 3 chain-links (maximum) from the base.
Base Coverage Area
Handsets in this area always
connect to the base.
Base
Overlap Coverage
Area
Handsets in this
area might connect
Repeater/charger
to the base or the
charger.
Extended Coverage Area
Handsets in this area
always connect to the
charger.
5