List Of Memory Switches - Brother KE-430FX Instruction Manual

6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

6-2. List of memory switches

Setting
No.
range
Work clamp/button clamp lift timing when sewing is complete
OFF
001
1
2
Sewing start speed
OFF
100
ON
Single-stitch test feed
OFF
200
ON
Production counter display
300 OFF
ON
Button hole distance display (*2)
401 OFF
ON
X-scale/Y-scale mm display (*3)
402 OFF
ON
Display for program numbers 1 to 89 (1 to 64 for BE-438)
OFF
404
ON
Cycle program numbers (C01 to C30)
OFF
405
ON
Program numbers switched by F keys
0
1
2
406
3
*1: Off for KE-430FX･FS and ON for BE-438FX.
*2: The setting is enabled when memory switch No. 402 is set to "ON" and (for the BE-438FX) when pattern No. 1 to No. 64
(button hole data) is selected.
*3: The mm display may differ slightly from the actual sewing size.
*4: If none of program numbers 200 to 999 or cycle program numbers C01 to C30 have been programmed, this setting is
invalid. (Operation occurs as though the setting is 'ON'.)
45
Does not lift automatically.
Lifts at the final stitch position.
Lifts after moving to the home position.
The sewing speed for the first 1 - 5 stitches is set by memory switch nos. 151 -
155.
(Refer to the Service Manual for details of memory switch nos. 151 - 155.)
The speed increases slowly.
The slow start pattern can be selected in program mode.
Test feed starts when the foot switch is depressed, and it continues automatically
until the final stitch.
Test feeding is carried out stitch by stitch when the foot switch is depressed.
In addition, when the test indicator is illuminated, test feeding will move forward
one stitch at a time when the machine pulley is turned by hand.
Lower thread counter display
Production counter display
X-scale and Y-scale will be displayed as pattern outer dimensions (mm).
X-scale and Y-scale will be displayed as button hole distances (mm).
Displayed as %.
Displayed as mm.
Program numbers 1 to 89 (1 to 64 for the BE-438) are skipped during program
number selection operations so that these numbers cannot be selected. (*4)
Program numbers 1 to 89 (1 to 64 for the BE-438) are displayed during program
number selection operations.
Cycle program numbers are skipped during program number selection operations
so that these numbers cannot be selected.
Cycle program numbers are displayed during program number selection
operations.
When the F1 to F4 keys are pressed, operation switches to program numbers 1 to
4.
When the F1 to F4 keys are pressed, operation switches to program numbers 201
to 204.
When the F1 to F4 keys are pressed, operation switches to cycle program
numbers C01 to C04.
When the F1 to F4 keys are pressed, operation switches to the program number
which has been pre-assigned to the respective key.
Assignment to F1 key: Memory switch No. 407
Assignment to F2 key: Memory switch No. 408
Assignment to F3 key: Memory switch No. 409
Assignment to F4 key: Memory switch No. 410
KE-430FX/KE-430FS, BE-438FX
Setting items Default
1
ON
*1
OFF
OFF
OFF
ON
ON
0