Table of Contents
Advertisement
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
5-6. Correcting the upper thread tension <For KE-430FX and BE-438FX>
The upper thread tension value is always displayed during sewing standby mode, and it can be changed at any time.
<A. Basic method of use>
The changes made at this time will be reflected in each program, so this is a useful way of changing programs while checking
actual sewing.
<B. Overall correction>
This function is useful if you would like to change the tension values for all programs at once.
43
1. Press the
TENSION display (2).
・ The upper thread tension value which is set will be
applied the next time sewing is carried out.
2418B
1. Press the TENSION key.
・ The TENSION indicator will illuminate.
・ The overall correction value will be displayed in the
TENSION display.
2. Press the
correction value in the TENSION display.
・ The upper thread tension value which is set will be
applied the next time sewing is carried out.
*
The upper thread tension which matches the overall
correction value which has been set for the upper
thread tension will be applied during sewing, regardless
2419B
of whether the TENSION indicator is illuminated or
switched off.
(In this case, the setting value of "76" which was set in
<A. Basic method of use> has the setting value of "5"
added to it in <B. Overall correction> so that the upper
thread tension applied will be "81".）
KE-430FX/KE-430FS, BE-438FX
or
key (1) to change the value in the
or
key (1) to change the overall
2382B 2383B
Hide quick links:
Advertisement
Table of Contents
