6-4. Using the production counter
<Setting the counter value>
Change the mode to production counter setting
TEST indicator and COUNTER indicator illuminate
Change the counter value.
Apply the changed parameter setting.
Ending setting mode
<Production counter operation>
The production counter is always operating. (It operates even if the production counter display is not active.) If you press the SELECT
key so that the COUNTER indicator illuminates when memory switch No. 300 is 'ON', the current production counter value will be
displayed in the menu display instead of the lower thread counter value. (The SPEED indicator will also illuminate at this time.)
SPEED indicator illuminates
TEST indicator switches off
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
While pressing the TEST key, press the
・ The 7 digits of the current counter value will be
displayed in the PROGRAM No. display and the
key (1) to set the counter value.
• The counter value can be set from  to
• If you press the RESET key during setting mode, the
value will become .
• If the value is changed, the display will change to
Press the ENTER key.
・ The value will be applied and the display will change
・ If you press the TEST key without pressing the
ENTER key, you can cancel the parameter changes.
Press the TEST key.
1. The counter is incremented by 1 each time one sewing
operation is complete. If the production counter display is
active, the number being displayed in the menu display (1)
will be incremented by 1.
* If you would like the digits to be displayed in all columns,
use the temporary display function described below.
* If you press the RESET key (2) for 2 seconds or more, the
counter value can be reset to .
Temporary display function
・ While pressing the ENTER key, press the F1 key. The
production counter will be displayed as 7 digits while the
keys are being pressed.
・ While pressing the ENTER key, press the F2 key. The
lower thread counter will be displayed while the keys are