| Installing the Switch
C
2
HAPTER
Mounting
D
S
ESKTOP OR
Attach the four adhesive feet to the bottom of the first switch.
1.
Figure 9: Attaching the Adhesive Feet
Set the device on a flat surface near an external power source, making sure
2.
there are at least two inches of space on all sides for proper air flow.
If installing a single switch only, go to
3.
page
41.
If installing multiple switches, attach four adhesive feet to each one. Place
4.
each device squarely on top of the one below, in any order.
M
HELF
OUNTING
"Connecting to a Power Source" on
– 38 –