Table of Contents
Advertisement
| Installing the Switch
C
2
HAPTER
Connecting to a Power Source
Figure 12: AC Power Receptacle
Check the indicators on the power module as the switch is powered on to
4.
verify that the AC LED indicating external power status is on, and that the
+12V LED indicating internal power conversion is on. If not, recheck the
power supply and power cable connections at the supply source and at
power module.
If you have installed both a primary and redundant power conversion
5.
modules, verify that the LEDs on both modules are lit as indicated in the
preceding step.
– 44 –
A S
Advertisement
Table of Contents
