TEK-CPCI-1000 Technical Reference Manual
13.3 OUTPUT SELECTION
Select the FLASH location, then press the ENTER key. The program displays the amount of
available FLASH memory.
Press the ENTER key to accept the listed amount or press the "S" key to customize the
amount.
OUTPUT SELECTION FOR THE TRANSFER
Output selected: External FLASH device via serial link
Choose the size of the disk using the arrow keys:
Legend: selected block
Strike any key to continue.
↑ ↓ → ←
Enter to select option
,
=
unselected block =
↑
End
Special disk
13-4