Battery Backup Circuit - Teknor Industrial Computers TEK-CPCI-1000 Technical Reference Manual

Table of Contents

Advertisement

TEK-CPCI-1000 Technical Reference Manual

7.12 BATTERY BACKUP CIRCUIT

The TEK-CPCI-1000 comes with a 350mA/h TL5186 TADIRAN battery with a shelf life
of approximately 10 years (under "no-load" conditions).
CAUTIONS
1.
Removing jumper W10 will cause the set-up and real-time clock
information to be lost.
2.
The actual voltage supplied by the battery is 3.6 volts. This can be
verified at pins 16-32 on the SRAM device using a standard voltmeter.
The actual life of the battery depends on the amount of time the DC power is not applied
and on the environmental (temperature) conditions.
0
operating range of -55
to 75
The TADIRAN TL5186 is U.L. recognized. Its U.L. component recognition is MH12193.
WARNING
Danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
manufacturer's instructions
0
C and discharge characteristics vary with temperature.
Dispose
of
used
batteries
7-18
The TADIRAN TL5186 has an
according
to
the

Advertisement

Table of Contents
loading

Table of Contents