Rear-Panel Connectors - Teknor Industrial Computers TEK-CPCI-1000 Technical Reference Manual

TEK-CPCI-1000 Technical Reference Manual
2.3

REAR-PANEL CONNECTORS

Rear panel connectors consist of two 2mm Hard Metric connectors. The lower one is
dedicated to the PCI signals while the upper one is reserved to I/O signals.
2.3.1 I/O connector (J5/J8): CPCI P4/P5
2.3.2 PCI connector (J11/J13):
Speaker signal - The speaker signal is also available on the
onboard multi-function connector (J2).
Enhanced IDE interface - Accelerates PIO data transfers and
provides an interface
Master/Slave IDE devices (HD, CD-ROM).
ISA I/O - Fully ISA bus compatible interface.
USB - The onboard USB controller supports up to two USB ports.
One USB port is available through this connector, a second one is
available on the front plate.
Floppy Disk and Keyboard Signals.
PS/2 Mouse. When the mouse interrupt function is enabled, the
mouse interrupt is provided through IRQ12 to the CPU. A PS/2
mouse connector is also available on the front plate.
Hard Metric Connector - 2mm pitch
PCI Bus – compliant with PICMG 2.0 specification
Bus Performance - up to 132MB/sec
Hot swap - capabilities for peripheral connections
Up to seven loads on the PCI segment
2-4
for both Primary/Secondary and