TEK-CPCI-1000 Technical Reference Manual
7.7
PARALLEL PORT CONNECTOR (J3)
The onboard Parallel Port connector is a 26-pin male header located at the top right side of
the board. A 26 pin to pin flat cable is required to output the signals from the board to the
front plate.
The following list includes approved vendors for the J3 connector's mating parts:
Amp 746285-6 [optional strain relief: 499252-3],
Robinson Nugent IDS-C26PK-TG,
Thomas & Betts 622-2630 [optional strain relief: 622-2641].
(Polarized IDC female socket connector).
7-10