Advantech IPC-690 User Manual page 12

4. Slide the drive bay toward the front and lift it free from the chassis. Install the disk drives into their
proper locations in the drive bay. See figure 2.8:
5. One 3.5" drive can be installed inside the chassis. Pull out the power module from the rear panel by
unscrewing the 4 screws. Then you can insert one 3.5" drive above the power module. See figure
2.9:
2.9 Inserting the drives into the drive bay inside the chassis
2.8 Inserting the drives into the drive bay
IPC-6908 User's Manual 9