CUBELET CUTTER GRIDS
CUBE CUTTER GRID
l-114" x l-114" Cube Grid
(32 mm x 32 mm)
Start the unit by turning
the service switch to
and opening the line water valve.
NOTE: Left is "OFF"-Middle
position, only the pump
Check condenser fan to make sure it is revolving.
Water will not enter pump pan until freezing plate
gets cold and machine goes into a harvest cycle.
Check for even water flow over freezing plate. Unit
must be level for proper operation.
Check for desired cube thickness
and after 24
hours adjust if necessary.
will be obtained with ice thickness at l/2" (12 mm)
to 518" (16 mm).
is a registered trademark of KitchenAid,
Canada, Inc. Licensee
Part No. 759080-T
Ont. L5N 3A7
Printed in U.S.A.