Download Print this page

KitchenAid Ice Maker User Manual

Hide thumbs


In an effort to conserve natural resources, this ice maker includes a condensed User Guide. A complete User Guide can
be downloaded at The model number is located on the inside of the ice maker.
In the U.S.A., register your ice maker at
In Canada, register your ice maker at
Para una version de estas instrucciones en español, visite
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
: To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic
precautions :
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

How Your Ice Maker Works

When you first start your ice maker, the water pan will fill and the
system will rinse itself before starting to make ice. The rinsing process
takes about 5 minutes.
Under normal operating conditions, the ice maker will cycle at preset
temperatures. The ice level sensor located in the ice storage bin will
monitor the ice levels.
IMPORTANT: If the water supply to the ice maker is turned off, be sure
to set the ice maker control to OFF.
Your safety and the safety of others are very important.
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow instructions.




User Guide

Ice Maker

Disconnect power before cleaning.
Disconnect power before servicing.
Replace all parts and panels before operating.
Use two or more people to move and install ice maker.
The Ice Making Process
1. Water is constantly circulated over a
freezing plate. As the water freezes into
ice, the minerals in the water are
rejected. This produces a sheet of ice
with a low mineral content.



  Summary of Contents for KitchenAid Ice Maker

  • Page 1: Ice Maker

    Ice Maker LEARN MORE In an effort to conserve natural resources, this ice maker includes a condensed User Guide. A complete User Guide can be downloaded at The model number is located on the inside of the ice maker.
  • Page 2: Using The Controls

    B. O-rings D. Alignment arrow 3. The water filter compartment is located in the right-hand side of the ice maker controls. Push in on the door to release the latch, and then lower the door. NOTES: Pressing the On/Off button does not shut off power to the ice maker.
  • Page 3: Normal Sounds

    Normal Sounds Your new ice maker may make sounds that are not familiar to you. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces such as floors, walls and cabinets can make the sounds seem louder than they actually are.
  • Page 4: Water Filter

    5. Replace the lower access panel using the 4 screws. 6. Plug in ice maker or reconnect power. ACCESSORIES To order accessories, in the U.S.A., visit our web site or call 1-800-901-2042. In Canada, visit our web site or call 1-800-807-6777. Water Filter affresh ®...
  • Page 5: Problem Solver

    The ice maker may not restart once it does shut off. If there was a large amount of water added to the ice maker, wait a few minutes for the drain pump to clear. If there is still water in the bin, check to see whether the drain hose is kinked.
  • Page 6: Ice Production

    Dirt or lint may be blocking the airflow through the condenser. If there is white scale buildup in the ice maker’s water or freezing system, you should clean the ice maker. If the drain cap is loose, water will empty from the water pan, and you will have either thin ice or no ice. Tighten the drain cap.
  • Page 7: Plumbing Problems

    RECOMMENDED SOLUTIONS Water Not Entering Drain If the drain hose is not aligned over the drain, move the ice maker to align the drain. Properly NOTE: Service technicians cannot repair plumbing problems outside of the ice maker. Call a licensed, qualified plumber.
  • Page 8: Warranty

    YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. Service must be provided by a KitchenAid designated service company. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in which it was purchased.
  • Page 9: Utilisation De La Machine À Glaçons

    POUR EN SAVOIR PLUS Afin de conserver les ressources naturelles, cete machine à glaçons comprend un guide d’utilisation rapide. L'utilisateur peut télécharger un guide complet sur Le numéro de modèle se trouve sur la paroi interne de la machine à glaçons.
  • Page 10: Utilisation Des Commandes

    Système de filtration d’eau 2. Une fois qu’elle a atteint l’épaisseur désirée, la plaque de glace se dégage et glisse dans une grille de coupe, où elle est taillée en glaçons. Ne pas utiliser pour le filtrage d'une eau 3. L’eau contenant les déchets minéraux est microbiologiquement polluée ou de qualité...
  • Page 11: Bruits Normaux

    REMARQUE : Si le filtre n’est pas bien emboîté dans le logement, la REMARQUE : Il y aura peut-être de l’eau dans le filtre. Il est possible machine à glaçons ne produira pas de glaçons. qu’il y ait un déversement. 3.
  • Page 12 6. Brancher la machine à glaçons ou reconnecter la source de courant électrique. ACCESSOIRES Pour commander les accessoires, aux É.-U., consulter notre page Web ou composer le 1-800-901-2042. Au Canada, consulter notre page Web ou composer le 1-800-807-6777. Filtre à eau Lingettes pour acier inoxydable affresh ®...
  • Page 13: Résolution De Problèmes

    RÉSOLUTION DE PROBLÈMES Scannez le code à gauche avec votre téléphone portable ou consultez pour des conseils qui vous permettront peut-être d'éviter une intervention de dépannage. Fonctionnement de la machine à glaçons AVERTISSEMENT Risque de choc électrique Brancher sur une prise à 3 alvéoles reliée à la terre.
  • Page 14: Production De Glaçons

    Production de glaçons AVERTISSEMENT Risque de choc électrique Déconnecter la source de courant électrique avant l'entretien. Replacer pièces et panneaux avant de faire la remise en marche. Le non-respect de ces instructions peut causer un décès ou un choc électrique. PROBLÈME SOLUTIONS RECOMMANDÉES La machine à...
  • Page 15: Problèmes De Plomberie

    Pendant trois ans à compter de la date d'achat, lorsque ce gros appareil ménager est installé, utilisé et entretenu conformément aux instructions jointes au produit ou fournies avec, la marque KitchenAid de Whirlpool Corporation ou Whirlpool Canada LP (ci-après désignées “KitchenAid”) paiera pour les pièces de rechange spécifiées par l'usine et pour la main-d'œuvre pour corriger les vices de matériaux ou de fabrication qui existaient déjà...
  • Page 16 5. Les défauts d'apparence, notamment les éraflures, traces de choc, fissures ou tout autre dommage subi par le fini du gros appareil ménager, à moins que ces dommages ne résultent de vices de matériaux ou de fabrication et ne soient signalés à KitchenAid dans les 30 jours suivant la date d'achat.