Thermostat Callbratlons; Shipboard Operation - KitchenAid KULSL85 Installation Instructions Manual

Automatic ice maker
Table of Contents

Advertisement

c
hanging the Bin Door and Lower Panels
Thermostat calibrations
If ice maker is installed more than 2,000 feet
(600 m) above sea level, the Bin and Ice
Thickness Thermostats
must be adjusted
to a warmer setting. Disconnect electricity,
remove thermostat, and follow the directions
for turning the altitude adjustment screw as
shown in the label on each thermostat.
Shipboard operation
When this ice maker is installed aboard a
and the cutter grid. It keeps the water
ship, it may be necessary to purchase and
flowing over the evaporator from spilling into
install a water deflector. The deflector hangs
the storage bin area. Order the necessary
between the lower edge of the evaporator
parts from your local ice maker dealer.
3

Advertisement

Table of Contents
loading

Table of Contents