Audio; Line Out - Bosch VideoJet X10 Installation And Operation Manual

44 en | Configuration Using a Web Browser
5.14

Audio

You can set the gain of the audio signals to suit your specific requirements. The current video
image is shown in the small window next to the slide controls to help you check the audio
source and improve assignments. Your changes are effective immediately.
If you connect via Web browser you must activate the audio transmission on the Livepage
Configuration page (see Section 5.32 Livepage Configuration, page 86). For other connections,
the transmission depends on the audio settings of the respective system.
5.14.1 Line In 1
You can set the line input gain. Make sure that the display does not go beyond the green zone
during modulation.
5.14.2

Line Out

You can set the line output gain. Make sure that the display does not go beyond the green
zone during modulation.
V3.0 | 2007.09 Installation and Operating Manual
VideoJet X10
Bosch Security Systems