Configuration Menu - Bosch VideoJet X10 Installation And Operation Manual

VideoJet X10
5.1.5 Protected VideoJet X10
If the VideoJet X10 is password protected against unauthorized access, the Web browser
displays a corresponding message and prompts you to enter the password when you attempt
to access protected areas.
NOTICE!
i
The VideoJet X10 offers the option to limit the extent of access using various authorization
levels (see Section 5.6 Password, page 34).
1.
2.
5.1.6 Protected Network
If a RADIUS server is employed in the network for managing access rights (802.1x
authentication), the VideoJet X10 must be configured accordingly, otherwise no
communication is possible.
To configure the unit, you must connect the VideoJet X10 directly to a computer using a
network cable. This is because communication via the network is not enabled until the
Identity and Password parameters have been set and successfully authenticated (see
Section 5.28.17 Authentication, page 80).
5.2

Configuration Menu

The SETTINGS page provides access to the configuration menu, which contains all the unit's
parameters arranged in groups.
You can view the current settings by opening one of the configuration screens. You can change
the settings by entering new values or by selecting a predefined value from a list field.
All parameter groups are described in this chapter in the order in which they are listed in the
configuration menu, from the top of the screen to the bottom.
CAUTION!
!
The settings in the configuration menu should only be processed or modified by expert users
or system support personnel.
All settings are stored in the VideoJet X10's memory so that they are retained even if the
power supply is interrupted.
Bosch Security Systems
Enter the user name and associated password in the corresponding text fields.
Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
Installation and Operating Manual
Configuration Using a Web Browser | en 29
V3.0 | 2007.09