Source Type; Video Input - Bosch VideoJet X10 Installation And Operation Manual

VideoJet X10
5.13

Video Input

You can activate the 75 Ohm terminating resistance for the video input on the VideoJet X10.
The terminating resistance must be deactivated for the video signal to be looped through.
Every video input is closed at the time of delivery.
5.13.1 75 Ohm termination
Select Off if the video signal is to be looped through.
5.13.2

Source type

To allow VCRs to be connected as a video source, you can change the characteristic of the
video source from the preset value of Camera to VCR. VCRs require a more tolerant setting for
the internal PLL as a result of jitter effects caused by the mechanical components of a VCR.
NOTICE!
i
In some cases, selecting the VCR option can lead to an improvement in the video image even
with a camera connected.
Bosch Security Systems Installation and Operating Manual
Configuration Using a Web Browser | en 43
V3.0 | 2007.09