Terminal-Based Communication - 2N VoiceBlue Next User Manual

4.1 Terminal-Based Communication

®
2N VoiceBlue Next
maximum count of active Telnet sessions is
requests than ten, the GSM gateway rejects the connection.
Terminal
®
2N VoiceBlue Next
in one of the following formats: AT[command]<CR>, or AT[command]<CR><LF>. The
answer consists of up to several rows, an empty row with <CR><LF> and the reply
type: OK, ERROR, or BUSY. Use A/<CR> to repeat the command.
The gateway requests a password by displaying the
It uses an extended set of AT commands for configuration. Refer to
list of terminal AT commands.
Example of a login window:
[ VoiceBlue Next ] V–01.00.01 B–00.91
Date/time: 15.1.2010/20:56:53.98
SNumber: M202–1501270008
Login: Admin
Password: **
Access Data
®
2N VoiceBlue Next
reconfigured.
The access password and name are identical with those of the web interface. The
access data cannot be changed from the gateway Telnet interface (only from the web
interface) for security reasons.
Refer to
®
2N TELEKOMUNIKACE a.s., www.2n.cz
allows for communication via the TCP/IP Telnet protocol. The
acts as an ANSI terminal with echo. Text commands are entered
receives Telnet requests on port 23. Port 23 can not be
Subs. 2.2 for access data factory settings.
ten . If there are more Telnet connection
Login: and Password: prompts.
Subs.4.2 for the
80