Using The System While You're Away From Home - Uniden DECT 3035 Owner's Manual

Screening Your Calls
You can use the answering system for call screening. While the system
takes a message, you can listen on the base speaker (if you turn on
Screen) or from a handset. Only one handset can screen calls at a time.
If another handset tries to screen calls, it beeps and returns to standby.
To...
hear the caller leaving a
message
answer the call
mute the call screen without
answering(if you mute the call
screen, the system continues
taking the message:
it just stops playing through the
speaker).

Using the System While You're Away from Home

You can dial in to your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select
Security Code. Use the number keypad to enter a two-digit security code
(00 to 99). Press
Remember to make a note of your new security code!
#
Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the system
is turned off, it answers after 15 rings & sounds a series of beeps.)
2. During the greeting or beeps, press
security code. If you enter it incorrectly 3 times, the system hangs up
and returns
to standby.
3. The system announces the time, the
number of messages in memory, and a
help prompt. It beeps to let you know it's
waiting for a command.
4. When you hear beeping, enter a 2-digit
command from the chart.
18
From the base
Listen to the caller
over the speaker.
NA
Press
MEnu/SElEcT
when you're finished.
From a handset
Press
Press
Press
. the handset to the
Play/SToP
cradle.
Ans.
# and immediately enter your
#1 Repeat message
#2 Play message
#3 Skip message
#4 Delete message
#5 Stop playback
#6 Turn the system on
#9 Turn the system off
#0 Hear help prompts
Call
MESSagE/MuTE .
.
Talk/flaSh
End or return
Setup, then select