Getting Your Message; Using The System While You're Away From Home - Uniden D1484 series User Manual

- You can press the number key shown next to each command instead of
scrolling through the screens.
- If you do nothing for 30 seconds, the phone returns to standby.

Getting Your Message

When you have new messages (that you have not listened to yet), only the
new messages will be played. To play old messages, completely play all new
messages first, and then start message playback again.
To...
play new messages
restart this message
replay an earlier
message
skip a message
delete this message
play old messages
stop playback
Deleting All Messages
With the phone in standby, press
Screening Your Calls
While the system takes a message, you can listen on the base speaker (if you
turn on Call Screen) or from a handset. Only one handset can screen calls at a
time. If another handset tries to screen calls, it beeps and returns to standby.
To...
hear the caller leaving a
message
answer the call
mute the call screen
without answering*
* If you mute the call screen, the system continues taking the message: it just stops
playing through the speaker.

Using the System While You're Away from Home

You can dial in to your answering system from any touch-tone phone. Before
you can use this feature, you must program a security code.
12 - English
From the base
Press
pLay/sTop.
Wait at least 5 seconds after starting this message,
press
rEV.
Within 2 seconds after starting a message,
press
rEV.
Press .
fwd
Press .
dELETE
After the system plays all new messages,
press again.
pLay/sTop
Press .
pLay/sTop
; press
dELETE
From the base
Listen to the caller
over the speaker.
NA
Press
pLay/sTop
From a handset
Press
MEssagE/MuTE
select 1:Repeat.
select 1:Repeat.
Select 3:Skip.
Select 4:Delete.
select 2:Play.
Select 5:Stop.
again to confirm.
dELETE
From a handset
Press
MEssagE/MuTE
Press
TaLk/fLash
Press
ENd
.
handset to the cradle.
.
.
.
or return the