Using The System While You're Away From Home - Uniden D3097 Series User Manual

To...
stop playback
Screening Your Calls
You can use the answering system for call screening. While the system takes a
message, you can listen on the base speaker (if you turn on
handset. Only one handset can screen calls at a time. If another handset tries to
screen the call, it beeps and returns to standby.
To...
turn on Call Screen
hear the caller leaving
a message
answer the call
mute the call screen
without answering
 If you mute the call screen, the system continues taking the message: it just
stops playing through the speaker.

Using the System While You're Away from Home

You can also operate your answering system from any touch-tone phone. Before
you can use this feature, you have to program a security code.
Programming a Security Code
1. With the phone in standby, open the menu. Select
Security Code.
2. Use the number keypad to enter a two-digit security code
MENU/OK when you're finished.
#
Remember to make a note of your new security code!
Dialing in to Your System
1. Call your telephone number and wait for the system to answer.
- If you have the
you have new messages and 4 rings if you don't. You can hang up during the
third ring.
- If your answering system is off, it will answer after about 10 rings and sound
a series of beeps instead of your greeting.
2. During the greeting (or beeps), press 0 and immediately enter your security
code. (If you enter it incorrectly 3 times, the system hangs up and returns to
standby.)
20 - English
Downloaded from www.Manualslib.com
From the base
Press PLAy/STOP.
From the base
NA
Just listen to the caller over
the speaker.
Not available
Press PLAy/STOP.
Ring Time set to
manuals search engine
From a handset
Select 5:Stop.
From a handset
Press MENU/OK then select
Ans. Setup/Call Screening
menu. Turn call screen on
or off.
Press MUTE/DELETE.
Press TALK/FLASH.
Press END/CLEAR or return
the handset to the cradle.
Answering
Toll Saver, the system answers after 2 rings if
Call Screen) or from a
Setup, then select
(01 to 99). Press