Uniden DECT 3035 Owner's Manual page 24

Place the mounting slots over
the pins on the wall plate.
Wall plate
Slide the base
down to lock it
into place.
Removing the wall-mount bracket
At the bottom of the base,
pinch the two "nose" of the
wall-mount bracket as
shown, and then slide
the bracket away from
the base.
Note: Mounting the phone directly on the wall
• Be sure the wall is capable of supporting the weight of the phone, and use
the proper type of anchoring device for the wall material.
• Insert two #10 screws (minimum length of 35mm , not supplied) into the
wall, 100mm apart.
• Leave the screw heads 3mm away from the wall to allow room for
mounting the phone.
• Align the mounting slots over the screws and slide the base down into
place as shown above.
24
(To AC outlet)