Personalizing The Greeting - Uniden DECT 3035 Owner's Manual

Set the number of rings (6, 9 or 12) before the system
Ring Time answers.
you have new messages or after 4 rings if you don't.
Set the amount of time
Record Time a message. Choose
system to let callers to leave a message.
Have the base beep every 15 seconds when you have a new
Message Alert message. The alert stops after you listen to all your new
messages or if you press any key on the base.
Turn on the call screen feature so you can hear callers as
Call Screen
they leave messages on the base speaker (see p. 18).
Ans. On/off Turn your answering system on or off.
Record
Record an outgoing message or greeting (see below).
Greeting
Greeting
Switch greetings or delete your greeting (see below).
Options

Personalizing the Greeting

Your personal outgoing message or greeting can be from 2 to 30
seconds long. If you don't record a greeting, the system uses a pre-
recorded greeting: Hello, no one is available to take your call. Please
leave a message after the tone.
To... Follow these steps:
1. Open the menu with the phone in standby. Select
then
2. Press
Record a
says "Record greeting" before speaking.
personal
3. Press
greeting
your new greeting.
4. To keep the greeting, press
SElEcT
1. Open the menu with the phone in standby. Select
Switch
then
between
2. The system plays back the current greeting. Press
greetings
to switch greetings.
Delete
your Switch to your personal greeting, then press
greeting
16
Toll Saver makes the system answer after 2 rings if
Announce Only
Record Greeting.
MEnu/SElEcT to start recording. Wait until the system
MEnu/SElEcT to stop recording. The system plays back
.
Greeting Options.
(1 or 4 minutes) callers have to leave
if you don't want the
End . To re-record it, press
Ans. Setup,
MEnu/
Ans. Setup,
MEnu/SElEcT
inTErcoM/clEar .