Kia 2004.5 Spectra Service Technical Training page 203

2004.5 Spectra Technology
TARGET AUDIENCE
MODULE GOAL
MODULE OBJECTIVES
MODULE INSTRUCTIONS
REQUIRED MATERIALS
TIME TO COMPLETE
OVERVIEW
TABLE OF CONTENTS
Total Possible Points: 5
Brakes
The target audience for this module will be Kia Master
level, Master level candidates, Senior level, and Senior
level candidates service technicians.
In this module, you will be given the opportunity to
practice performing braking service and diagnostic
procedures.
Objectives of this module are for you to demonstrate
your ability to:
• Diagnose Wheel Speed Sensor (WSS) DTC.
• Perform ABS valve cycling for brake bleeding of air.
Carefully read and follow the instructions for each
activity. Answer the questions and fill in the blanks
with the requested information as you perform the
activity. When you have finished, have your service
training instructor evaluate your work and sign-off that
it has been properly completed.
You will be divided up into teams and given a series of
tasks to complete. If you do not understand the
instructions or have any questions, don't hesitate to
ask the instructor for further clarification.
In order to complete this module, you will need the
following items:
• 2004.5 Spectra (LD) (Task 1)
• 2004.5 Spectra (LD) with ABS (Task 1 and 2)
• #2 pencil or preferred writing instrument
• Hi-Scan Pro (HSP)
• DVOM and T-Connector
• KSIS and sign/log on
This module will take approximately 30 minutes.
This guided practice will give you the opportunity to
put into practice the information you have learned in
the Brake theory module. Under the supervision of a
trained Kia service-training instructor you will perform
a series of tasks to fulfill the objectives of this guided
practice.
Task #1: Wheel Speed Sensor Diagnostics
(3 points possible)
Task #2: ABS Valve Cycling for Brake Bleeding
(2 points possible)
1