Kia 2004.5 Spectra Service Technical Training page 160

OBDII SYSTEM
READINESS TESTS
Total Possible Points: 8
6
Using a Hi-Scan Pro, clear the OBDII Readiness flags.
Then perform the following four-drive cycle test using
a lift: (1) Idle Test mode (comprehensive component),
(2) Short Driving Test mode, (3) Long Driving Test
mode, and (4) Evap. Leakage Test. Have your
instructor inspect and authorize you to begin the
actual drive part of the test (#2-4).
The drive cycle involves:
• Cold start with idle to engine operating
temperature
• Accelerate to 50MPH with a steady cruise for
several minutes
• Decelerate to a steady lower MPH cruise for several
minutes
• Then, slow down until stop with an idle.
2004.5 Spectra Technology
Driveability