Zhone iMarc SLV 9126 Installation Instructions Manual page 6

Procedure
1
Insert the power supply's 4-prong plug into the POWER jack.
When inserting the plug at the rear of the iMarc unit, align the plug with the notch above the
POWER jack. Make sure the locking tab snaps securely into the jack.
Locking
Tab
2
Insert the socket end of the power cord into the power supply's receptacle.
3
Plug the power cord into the grounded power outlet and check the LEDs.
If any LEDs light, you have power. If not, refer to Troubleshooting in the iMarc SLV
Operations Guide for possible explanations.
6
POWER COM ENET DSX DSX-1 NET MDM DBM
Power Cord /
Transformer
3-Prong
Grounded
AC Outlet
02-17284
9126-A2-ZN11-40