Table of Contents
Advertisement
13
System inspection and maintenance
13.7 Inspection and maintenance logs
The inspection and maintenance logs provide an overview of the required inspection and maintenance work.
B Initial and date the inspection operations completed.
The inspection and maintenance logs can also be used as templates.
Inspection work
1.
Check general condition of heating system
2.
Visual inspection and function check of the heating
system
3.
Check fuel and water-carrying components of the system
for:
• Leaks during operation
• Visible signs of corrosion
• Signs of aging
4.
Check the combustion chamber and heating surfaces for
contamination. Shut down the heating system first.
5.
Check the burner (
6.
Check the flue gas and venting system for proper
operation and safety (see
7.
Check the operating pressure and inlet pressure of the
diaphragm expansion vessel for heating systems
8.
Check the function of indirect-fired water heater tank and
anode rod (
tank documentation)
9.
Check the control panel setting (see
documentation)
10.
Record the final checks of the inspection work, incl.
measurements and test results
Confirm professional inspection
Tab. 15 Inspection log
If during inspection work conditions are identified that require additional service and maintenance, perform
this work on an as-needed basis. If make-up water is added, the quality of this water must correspond to the
specifications in the enclosed operating manual.
52
burner documentation)
burner documentation)
control panel
Page
Date:____________
48
51
Company stamp/
signature
Logano G615 - Subject to technical modifications
Date:____________
Company stamp/
signature
Hide quick links:
Advertisement
Table of Contents
