Heinner MGL-12B User Manual page 13

www.heinner.com
IV. INTRODUCTION
This appliance is equipped with a thermostat system. This system will automatically cut off
the power supply to the appliance in case of overheating.
If you appliance suddenly stops running:
1. Pull the mains plug out of the socket.
2. Press the switch button to turn off the appliance.
3. Let the appliance cool down for 60 minutes.
4. Put the mains plug in the socket.
5. Switch the appliance on again.
Please contact your dealer of an authorized service center if the thermostat system is
activated too often.
If you plug in, the indicator light will be on.
CAUTION: In order to avoid a hazardous situation, this appliance must never be
connected to a time switch.
V. IMPORTANT
1. Read these instructions for use carefully and look at the illustrations before
using the appliance.
2. Keep these instructions for future reference.
3. Check if the voltage indicated on the appliance corresponds to the local mains
voltage before you connect the appliance.
4. Never use any accessories of parts from other manufacture .Your guarantee will
become invalid if such accessories or parts have been used.
5. Do not use the appliance if the mains cord, the plug or other parts are damaged.
6. If the mains cord of this appliance is damaged ,it muse always be replaced by
manufacture or a service center authorized, in order to avoid hazardous
situations.
7. Thoroughly clean the parts that will come into contact with food before you use
the appliance for the first time .
8. Unplug the appliance immediately after use.
9. Wait until moving parts have stopped running before you remove the parts of
the appliance.
1200W, 50/60Hz, 220-240V
12