Error Messages - Miele PW 6101 Operating Instructions Manual

Problem solving guide
Large articles of laundry stretching
during the spin cycle
Large articles of laundry (e.g. table cloths)
can stretch during the spin cycle. This can
generally be prevented by reprogramming
the machine.
Please contact the Miele Service
Department.
Service interval
If after switching the machine on the
following message appears in the display
the machine will need to be serviced by the
Miele Service Department.
Service interval 1
§
Call the Service Department
The display will go out after 5 minutes.

Error messages

,
Repairs to electrical, gas or steam
operated machines may only be carried
out by a suitably qualified person in
accordance with national and local safety
regulations. In the U.K. repairs to gas
heated machines must only be carried
out by a Corgi registered technician.
A message will appear in the display if there
is a problem either before starting a
programme or once it has started:
The display remains dark.
There is no power to the machine.
^ Check the mains switch and the on-site
fuses.
34
Power cut
y
Programme stop
Press the start button.
^ Once power has been restored press the
"h Start" button.
This error message can also indicate that
the winding on the motor has overheated.
^ Allow the motor to cool down.
Water inlet fault
M
Call the Service Department
if restart does not work.
i
^ Check the stopcock and then press the "h
A
Start" button.
Door lock fault
a
Call the Service Department
if restart does not work.
i
^ Push firmly on the door handle until you
hear the lock engaging. Confirm by
pressing "h Start".
f
f
f
M.-Nr. 06 533 412