Technical Data - STIEBEL ELTRON SH3-07 Installation Instructions Manual

800-355-4945
PHONE:

TECHNICAL DATA

"A" MODEL - 14 1/4 H X 7 7/8 W X 4 1/8 D - 1/2 PLUMBING FITTINGS
MODEL
SH3-07
SH3-10
"B" MODEL - 14 1/2 H X 16 5/8 W X 4 5/8 D - 3/4 PLUMBING FITTINGS
MODEL KW
SH3-12
SH3-14
SH3-19
SH3-24
"C" MODEL - 14 1/2 H X 16 5/8 W X 4 5/8 D 3/4 PLUMBING FITTINGS
MODEL KW
SH3-29
SH3-36
NOTE:
1. Boilers are considered a continuous load.
2. Copper conductors only.
SERVICE BULLETIN: Polarity matters on the Hydro-Shark Models with multiple circuits. On models
Sh3-14,19,24,29 and 36 the polarity of L1/L2 maters. If the installer places L1 on the left side of circuit
1, than L1 has to be placed on the left side of circuit 2 (SH3-14,19,24) and circuit 3 (SH3-29,36).
It does not matter if L1 or L2 is placed on the left or right side on the wireing block. It only
maters that all circuits are wired consistently, with L1 either always on the left or always on
the right. If the boiler will not run, reverse the L1 and L2 wires on one or two of the wiring
block to make the "polarity" consistent. The Factory is making changes to the interior wiring
so that the L1/L2 Polarity will not mater in the future. -May 14,2009
info@energyproducts.biz
EMAIL:
KW BTU
7.2 24,573
9.6 32,764
BTU
12 40,968
14.4 49,161
19.2 65,548
24 81,936
BTU
28.8 98,323
36 122,904
VOLTS AMPS
240 30
240 40
VOLTS AMPS
240 50
240 60
240 80
240 100
VOLTS AMPS
240 120
240 150
10
www.energyproducts.biz
WEB:
BRKR WT-LBS
(1)40
(1)50
BRKR WT-LBS
(1)70
(2)40
(2)50
(2)70
BRKR WT-LBS
(3)50
(3)70
5.9
5.9
17
20
20
20
24
24