Data Table; Sample Installation - STIEBEL ELTRON HSBC 300 cool (GB) (WPM) Operation And Installation Manual

iNSTallaTiON
Specification

17.4 Sample installation

17.5 Energy consumption data
Product datasheet: Hot water storage tanks to regulation (EU) no.
812/2013 / (S.I. 2019 No. 539 / Schedule 2)
Manufacturer
Supplier's model identifier
Energy efficiency class
standing loss S
storage volume V

17.6 Data table

Hydraulic data
Nominal capacity, DHW cylinder
Nominal capacity, buffer cylinder
Surface area, heat exchanger
Capacity, heat exchanger
External available pressure differential, circulation
pump, heat pump at 1.0 m³/h
External available pressure differential, circulation
pump, heat pump at 1.5 m³/h
External available pressure differential, circulation
pump, heat pump at 2.0 m³/h
External available pressure differential, circulation
pump, heating circuit 1 at 1.0 m³/h
External available pressure differential, circulation
pump, heating circuit 1 at 1.5 m³/h
External available pressure differential, circulation
pump, heating circuit 1 at 2.0 m³/h
External available pressure differential, circulation
pump, heating circuit 2 (optional) at 1.0 m³/h
External available pressure differential, circulation
pump, heating circuit 2 (optional) at 1.5 m³/h
External available pressure differential, circulation
pump, heating circuit 2 (optional) at 2.0 m³/h
DHW volume, top indirect coil
Heating water power input at flow rate, top heat
exchanger
Pressure drop at 1.0 m³/h, heat exchanger, top
Reheating time, top heat exchanger
Max. operating temperature heating water
www.stiebel-eltron.com
HSBC 300 cool (GB) Set
STIEBEL ELTRON
HSBC 300 cool (GB) Set
W
l
HSBC 300
cool (GB) Set
l
l
m²
l
hPa
hPa
hPa
hPa
hPa
hPa
hPa
hPa
hPa
l
kW - l/min
hPa
min
°C
Application limits
Max. permissible pressure (design pressure), DHW
Max. permissible pressure (design pressure), heat
exchanger, top
204651
Test pressure, DHW cylinder
Max. flow rate
Max. permissible pressure (design pressure), buff-
B er cylinder
61 Test pressure, buffer cylinder
291 Maximum permissible temperature
Heating water quality requirements
Water hardness
pH value (with aluminium fittings)
pH value (without aluminium fittings)
Conductivity (softening)
Conductivity (desalination)
204651
Chloride
Oxygen 8-12 weeks after filling (softening)
270
Oxygen 8-12 weeks after filling (desalination)
100
Power consumption
3.20
Max. power consumption, charging pump
21
Max. power consumption, circulation pump, heat-
656
ing side
Energy data
527
Standby energy consumption/ 24 h at 65 °C
Energy efficiency class
210
Electrical data
Rated voltage, control unit
725
Phases, control unit
Control unit fuse protection
663
Frequency
444 Output data
Tested to standard
665
518
189
220
23.4-15.0
56
33
89
HSBC 300
cool (GB) Set
MPa 0.7
MPa 0.3
MPa 1.50
l/min 25
MPa 0.3
MPa 0.45
°C 89
°dH ≤3
8.0-8.5
8.0–10.0
μS/cm < 1000
μS/cm 20-100
mg/l <30
mg/l <0.02
mg/l <0.1
W 60
W 60
kWh 1.45
B
V 230
1/N/PE
A 1 x B 16
Hz 50
EN 12897:2020
HSBC 300 cool | 29