GE Concord Ultra User Instructions page 62

Note
The system will not accept
the same code for two differ-
ent users.
54
B
8. Press . "PARTITION JUMP" or "PTN JP" appears:
1 #
Press + to turn the option off for this user code.
2 #
Press + to turn the option on for this user code.
B
9. Press . "SYSTEM TESTS" or "TESTS" appears:
1 #
Press + to turn the option off for this user code.
2 #
Press + to turn the option on for this user code.
B
10. Press . "LATCHKEY REPORT" or "LATCH" appears:
1 #
Press + to turn the option off for this user code.
2 #
Press + to turn the option on for this user code.
* B
11. Press + to move to the next user code, or
¾
To erase a user code:
1. Enter the programming menus by pressing
B
2. Press until the touchpad displays "USER CODES," then press
3. The touchpad displays "REGULAR USER CODES" or "REG CODES." Press
not delete the System Master code.)
B
4. Press until the touchpad displays the user code you wish to erase, then press
ple, if you want to change User code 4, press
"REG CODE 04."
5. Enter the System or Partition Master code you used in Step 1 and press
appears as "USER 04 ****" or "RG 01 ––––," for example.
* B
6. Press + to move to the next user code, or
¾
To change or delete the Partition Master Code:
1. Enter the programming menus by pressing
B
2. Press until the touchpad displays "USER CODES," then press
3. The touchpad displays "REGULAR USER CODES" or "REG CODES." Press
display reads "PARTITION MASTER CODE" or "PTN MASTER," then press
4. Enter the System Master Code to delete the existing Partition Master Code
OR enter a new 4 digit Partition Master Code to replace the existing code, then press
* 00 #
5. Press + + to exit the programming menus.
¾
To change the Master Code:
1. Enter the programming menus by pressing
B
2. Press until the touchpad displays "USER CODES," then press
3. The touchpad displays "REGULAR USER CODES" or "REG CODES." Press
display reads "SYSTEM MASTER CODE" or "SYS MASTER," then press
4. Replace the existing code with the new 4 digit System Master Code then press
* 00 #
5. Press + + to exit the programming menus.
* 00 #
+ + to exit the programming menus.
9
+ System or Partition Master
#
.
#
when the touchpad displays "USER 04" or
* 00 #
+ + to exit the programming menus.
9
+ System or Partition Master
#
.
9 CODE
+ System Master
#
.
CODE
.
#
. (You can-
#
. For exam-
#
. The deleted code
CODE
.
B
until the
#
.
#
.
.
B
until the
#
.
#
.
Concord Ultra