Batteries; Canopy - SAB Heli Division Goblin 700 Manual

BATTERIES

To secure the batteries, use the supplied O-rings HA012 [Bag14].
Install them on the model as you can see in figure 1
To secure the batteries correctly it is necessary to use hook and loop type tape on the battery support and batteries themselves
(figure 2).
Fig. 1

CANOPY

On the Goblin, the canopy touches the frame. To avoid triggering vibration, it is necessary to
attach an adhesive foam tape to the canopy HA006 [Bag14] (figure 3).
The canopy is locked at the point shown in figure 4 and with two H0036 knobs (both
equipped with OR HA008 [Bag14](figure 5)). Confirm the canopy is secure prior to each flight.
Fig. 3
Copyright@2012 – SAB Heli Division – All rights reserved
Chapter 14, Canopy and Battery
Fig. 2
Hook and Loop
Fig. 5
Fig. 4
Page 32