Index; Specifications; Chapter 1, Introduction - SAB Heli Division Goblin 700 Manual

INDEX

1 – Introduction
2 – Important notes
3 – Components and Box
4 – Carbon frame assembly
5 – Trasmission module
6 – Main rotor
The Goblin is a high performance radio controlled helicopter.
The design is original, moving away from traditional schemes, searching rationality for simplicity.
Our goal was to create a simple, high performance helicopter, with a minimum of mechanical components, and simple
maintenance.
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site www.goblin-helicopter.com for updates and other important information.
Thank you for your purchase, and have a great time with your Goblin!
SAB Heli Division, 1st February 2012.
Copyright@2012 – SAB Heli Division – All rights reserved
7 – Tail assembly
8 – Assembling the modules
9 – Installation of swashplate servos
10 – Installation of the ESC
11 – Installation of Flybarless unit and RX
12 – Installation of the motor

SPECIFICATIONS

Main rotor diameter: 1568mm (with 690mm blades)
Main blade length: 690 to 710mm
Tail rotor diameter: 296mm
Tail blade length: 115mm
Main shaft diameter: 12mm
Tail shaft diameter: 6mm
Spindle diameter: 10mm
Weight including standard electronics 3290g (excluding batteries).
Maximum motor size: 64mm diameter, maximum height 64mm
Battery compartment: 60x58x350mm (adaptable to 64x58x350mm)

Chapter 1, Introduction

13 – Installation of the boom
14 – Battery and Canopy
15 – In flight
16 – Maintenance
17 – Exploded views
18 – Spare parts
Page 1