Boom Assembly - SAB Heli Division Goblin 700 Manual

BOOM ASSEMBLY

•Insert the tail boom assembly making sure that the aluminum part of the tube touches the M3x16 screw.
•Lock the M8 nuts with the HA005 special tool supplied (Tray 2)
•Firmly lock the lateral M3 nuts.
•Assemble the H0038 carbon security plate
•Connect the tail servo wire to the previously fitted extension lead.
Fig. 1
Fig. 2
Copyright@2012 – SAB Heli Division – All rights reserved
Bag 12
Screw M3 to the
correct position
Fig. 3
Chapter 13, Installation of the boom
Fig. 4
Socket Head Cap Screw M3x8
HC050-S
Finishing
washer
H0007-S
Block
H0038-S
Page 30