Table of Contents
Advertisement
Camera Layout
RJ-45 connector: Supplies power to the camera through the network using PoE. If
PoE is not available, supplies DC12V or AC24V power source to the POWER connector.
ETHERNET link indication LED: Flashes green to indicate that data is being TX/RX by
the camera.
ETHERNET activity indication LED: Glows solid amber to indicate that a live
connection is established.
STATUS indication LED: Flashes amber about one time per second to indicate
normally working and flashes green about 2~3 time per second while upgrade.
POWER indication LED: Glows solid red if power is supplied properly.
SPEAKER connector: Connect external speaker for audio output.
MIC connector: Supplies external microphone as an audio input source.
POWER connection: Supplies DC12V or AC24V as the power source comply with
Class2.
RESET button: Restores the camera's factory default settings. This button is recessed.
Use a small tool, such as a paper clip, to press the reset button.
3
Advertisement
Table of Contents
